|
|
|
The last tool you might want to own; but with a little
practice you can be a pro. Both Copas come in two sizes, small:
8" long and large: 12" long.
|
|
Small 8"
$80.00  
Large 12"
$80.00
Description:
Often a source of more question than answers, will
make an ordinary wrap into a perfect half-round. The diameter
and perfection will vary with the size of the wrap and the
person using the tool. |
Click Image for Larger View |
|
|
Small 8"
$80.00
Large 12"
$80.00
Description:
The triangular copa will make crisp triangular
wraps that will vary in size with the amount of glass applied. Augustine
Fresnel found that triangular wraps (prisms) have great optical properties.
|
Click Image for Larger View |
|
|
Small 6"
$25.00
Medium 12"
$35.00
Large 24"
$90.00
Description:
The Pi Divider instantly gives you the correct size collar for the amount of cane you want to use. Lay out the cane and measure it with the straight arms of the caliper. The curved end will then give you the size of collar needed. |
Click Image for Larger View |
|
Description:
If you're ready to take on the tricky world of
faceted goblets you might consider a Fin Mold. Once you learn to master
it, your patience will be rewarded with crisp facets. Fin Molds
come in four different profiles with stainless steel construction.
Printable PDF of Fin Mold Sizes >> |
Click Image for Larger View |
|
6 Facet
4.5" tall & 3" wide at base
$70.00
8 Facet
4.5" tall & 3" wide at base
$70.00
Description:
6 or 8 ribs, 4.5" tall & 3" wide at base. |
Click Image for Larger View |
|
6 Facet
4.5" tall & 5" wide at base
$70.00
8 Facet
4.5" tall & 5" wide at base
$70.00
Description:
6 or 8 ribs, 4.5" tall & 5" wide at base. |
Click Image for Larger View |
|
6 Facet
6.5" tall & 3.5" wide at base
$70.00
Description:
6 ribs, 6.5" tall & 3.5" wide at base. |
Click Image for Larger View |
|
6 Facet
8" tall & 2.5" wide at top and 4" wide at base
$70.00
Description:
6 ribs, 8" tall & 2.5" wide at top and 4" wide at base. |
Click Image for Larger View |
|
|
$400.00
$400.00
Description:
This is not the ordinary mold most of us have used.
There are 24 individual ribs that can be arranged to meet
your needs. There are two different profiles, straight and
concave, that fit the same base. The top ring holds the ribs
securly in place and is easily removed to change the mold's
configuration. |
Click Image for Larger View |
|
|
$200.00
$200.00
$200.00
Description:
The detachable fin mold above comes with one set of ribs.
You can buy the other profile to mix and match or just have
a different look. Profiles are straight, concave and small concave.
Printable PDF of Interchangeable Rib Profiles >>
|
Click Image for Larger View
|
|
|
Order by number (choose in the shopping cart):
- #0 - 1.125 inch
- #1 - 1.375 inch
- #2 - 1.625 inch
- #3 - 2 inch
- #4 - 2.125 inch
- #5 - 2.375 inch
- #6 - 2.875 inch
$55.00
Description:
The marvel of marbles is now made significantly
simpler. To make a sphere, just grab your trusty Ring Tool and run
it around the bit as it rolls back and forth on the bench. After a
few passes, you'll have a new perfect marble. How cool is that?
|
Click Image for Larger View |
|
|
$25.00
Description:
This tool is made of brass with four ribs to open with. The ribs
are 3 inches long and 1 inch at their widest. With a wood handle.
|
Click Image for Larger View |
